Data Output Rs 232; Technical Data; Continuous Data Output - KERN HFT 3T0.5 Operating Manual

8 Data output RS 232

You can print weighing data via the RS 232C interface by pressing
interface according to the setting in the menu.
This data exchange is asynchronous using ASCII - Code.
The following conditions must be met to provide successful communication between
the weighing balance and the printer.
Use a suitable cable to connect the display unit to the interface of the printer.
Faultless operation requires an adequate KERN interface cable.
Communication parameters of display unit and printer must match (baud rate see
chap. 6.2, Menu item

8.1 Technical data

8.2 Technical data
Connection: Pin allocation plug
Baud-Rate: 600, 1200, 2400, 4800, 9600 selectable
Parity 8 bits, no parity

8.3 Continuous data output

Con1: Weighing mode
HEADER1: ST=STABLE， US=UNSTABLE
HEADER2: N=NET， GS=GROSS
HFT-BA-e-1812
,)
Pin 2 input
Pin 3 output
Pin 5 signal earth
via the
37