Registrar-Backup - Yamaha CS-700 Series Integrators Reference Manual

Parameter Description
address
String. IP address or DNS name.
CLI Format Examples:
get registrar
val registrar 200.200.210.150
set registrar 200.200.210.150
notify voip.registrar 200.200.210.150
Supported Products: CS700-SP
Available in API Version: 1.1

registrar-backup

Description: The IP address or DNS name of a failover SIP registrar. It should be configured with the
failover or secondary SIP registrar IP address or domain name if applicable. If no failover or
secondary SIP registrar is present in the VoIP infrastructure, this field should be left blank.
When this field is specified, the phone will register with the primary SIP registrar (the
'registrar' property) if it is accessible. If the primary SIP registrar becomes inaccessible via
UDP or TCP, the phone will attempt to register with the backup registrar. If the phone
successfully registered with the backup registrar, it will switch to the backup registrar to
perform outgoing calls and receive incoming calls. While the phone is registered with the
backup registrar, it will monitor the primary SIP registrar connection. Once the primary SIP
registrar becomes available again, the phone will roll back to register with the primary
registrar and route SIP traffic from/to the primary registrar.
Property Actions: set, get, notify
Command Definition:
Action Definition
get
get registrar-backup
response
val registrar-backup <"address">
set set registrar-backup <"address">
notify notify voip.registrar-backup <"address">
Parameters:
Parameter Description
address
String. IP address or DNS name.
CLI Format Examples:
get registrar-backup
val registrar-backup 200.200.210.151
set registrar-backup 200.200.210.151
notify voip.registrar-backup 200.200.210.151
Yamaha CS-700 Integrators Reference Guide 97