Yamaha CS-700 Series Integrators Reference Manual page 153

voip.allow-strict BOOLEAN
voip.stun-srv TEXT
Yamaha CS-700 Integrators Reference Guide
0 : Enable strict 0
routing
1 : Disable strict
routing
stun-address : String.
IP address, domain
name, or host name,
and optional port
number. Separate
multiple addresses by
comma.
Allow strict routing for SIP
registration proxies. By
default, proxies specified
for SIP registration will be
configured as loose-routing
proxies. The loose-routing
designation will be
automatically appended to
each proxy address when
the proxy is added to the
SIP Route header. Older
proxies may be strict-
routing (see IETF RFC
2543), not supporting loose
routing (see IETF RFC
3261). Enable this option if
you are using strict-routing
proxies. If this option is
enabled and you are
specifying one or more
loose-routing proxies in the
Proxy field, then you must
manually add the suffix to
each loose-routing proxy
address. For example,
"10.134.123.101;lr".
Specifies the STUN (Session
Traversal Utilities for NAT)
server IP address or name
to use to determine if the
phone is behind a NAT, the
type of NAT, and the public
address of the phone. The
field can contain a comma
separated list of servers.
Each server can be a
domain name, host name,
or IP address, and it may
contain an optional port
number. (For STUN see IETF
RFC 5389.)
153