Transfer; Play Ring-Tone - Yamaha CS-700 Series Integrators Reference Manual

Join (mix) only VoIP lines 1 and 2
join 1 1 2 1 usb 0 bt 0
join 1 1 2 1
Separate (not mixed) all calls from a conference
join 1 0 2 0 usb 0 bt 0
Supported Products: CS700-SP
Available in API Version: 1.1

transfer

Description: Transfer the source call to target call. The target call was previously initiated and can either
be in an "establishing" state (blind transfer) or a "connected" state (acknowledged
transfer). After the call has been successfully transferred, both lines are released.
Command Definition:
Action Definition
execute transfer
Parameters:
Parameter Description
source-line-id
Line ID of call being transferred
<1..2>
target-line-id
Line ID of call to which the source will be transferred
<3>
CLI Format Examples:
hold 1
dial 3 6175551212
transfer 1 3
Supported Products: CS700-SP
Available in API Version: 1.1

play ring-tone

Description: Play ring tone by index.
Command Definition:
Action Definition
execute play ring-tone <0..5>
Parameters:
Parameter Description
0..5
Ring-tone index
Yamaha CS-700 Integrators Reference Guide
<"source-line-id"> <"target-line-id">
85