Categories; System; System Properties; Product - Yamaha CS-700 Series Integrators Reference Manual

The table below describes the command syntax.
<parameter>
<"call-status">
<0|1|2>
<connected|disconnected>
<0..10>
<"paired"> [<"mac"> <"name">]
[<"mac"> <"name">]+
For properties, the description lists the actions that can be performed on the property, including:
get – property can be read; this is true of all properties
set – property can be set
notify – when the property changes, a notification is sent to registered clients
The Command Definition and Parameters tables describe each supported action and associated parameters and
values.
5.2

Categories

The API is organized by these Categories:
System (sys)
•
• Audio
• Camera
• Bluetooth (bt)
• Bluetooth Low Energy (ble)
• Call
• Network (net)
• VoIP
The sections below describe the interfaces supported in each category.
Changes to properties in the Network group must be applied by the net-commit command. See Appendix B –
Crestron Integration TCP/IP for re-registration sequence with the SIP server.
Changes to properties in the VoIP group must be applied by the voip-commit command. See Appendix B –
Crestron Integration TCP/IP for re-registration sequence with the SIP server.
5.2.1

System

5.2.1.1

System Properties

product

Description: Product name. Read-only set at manufacturing.
Property Actions: get
Yamaha CS-700 Integrators Reference Guide
Items in angle brackets are parameters
A quoted item represents the name of a parameter further described
in the Parameters section.
A list of possible values are separated by vertical bars.
An unquoted parameter is a literal value.
A range of values is separated by an ellipsis.
Square brackets designate optional parameters.
A list of repeating values is designated by a plus sign.
20