Yamaha CS-700 Series Integrators Reference Manual page 150

voip.auto- BOOLEAN
update-nat
voip.dtmf- TEXT
method
voip.dtmf-rtp- TEXT
payload-type
voip.media- BOOLEAN
onhold-method
Yamaha CS-700 Integrators Reference Guide
0 : Disable NAT 1
1 : Enable NAT
0 : RTP -- RFC2833 0
1 : SIP INFO
2 : In-band
96..127 96
0 : M line only -- 0
RFC3264
1 : M and C line --
RFC2543
Configure whether SIP
traversal behind NAT is
disabled. Used for device
behind a symmetric NAT
(Network Address
Translation). When
enabled, the device will
keep track of the public IP
address from the response
of the REGISTER request. If
it detects that the address
has changed, it will
unregister the current
Contact, update the
Contact with the transport
address obtained from the
Via header, and register a
new Contact to the SIP
registrar. This option will
also update the public
name of the UDP transport
if STUN is configured.
DTMF signaling method.
Specify the dynamic RTP
payload type for DTMF
transport using RTP.
The Media on Hold method
setting allows switching the
Media on Hold behavior
between the different RFC
definitions.
150