Yamaha CS-700 Series Integrators Reference Manual page 144

audio.eq NUMBER
audio.high-pass- INDEXED_
filter OPTION
audio.analog- BOOLEAN
audio-in-mode
audio.analog- NUMBER
audio-in-gain
audio.ring-tone INDEXED_
OPTION
audio.ringer- TEXT
volume
audio.speaker- TEXT
volume
camera.camera- TEXT
ptz-home
camera.camera- NUMBER
flicker
Yamaha CS-700 Integrators Reference Guide
1 : Voice 1
2 : Bass boost
3 : Treble boost
0 : None 0
1 : 110 Hz
2 : 140 Hz
3 : 175 Hz
4 : 225 Hz
0 : Automatic gain 0
setting
1 : Manually specify
gain setting
-12.0..40.0 : Manual 4.5
gain setting
0..5 : Ring-tone index 0
1..18 : Ringer volume 13
level
1..18 : Speak volume 13
level
String format: 0 0 1
<"pan"> <"tilt">
<"zoom">
pan: <-30..30>
tilt: <-18..18>
zoom: <1..22>
1 : 50Hz 2
2 : 60Hz
EQ setting used to adjust
the speaker frequencies to
your preference for the
room and the types of calls.
High-Pass filter setting.
High-Pass filters are
provided to adjust to room
and application
requirements. Use the
High-Pass filter in rooms
that have a high
background noise in the
low frequencies (air
conditioning, lighting
fixtures, etc.). All filters are
bi-quad filters, reducing the
signal by 6dB per octave.
For the TV audio in port,
select the gain setting
mode, either auto or
manual.
For the TV audio in port, if
analog-audio-in-mode is
manual, then this is the
gain value in dB. This value
can be increased or
decreased by 0.5dB.
VoIP ring-tone selection.
Configure VoIP ringer
volume.
Configure speaker volume
for calls.
Default PTZ settings for
home position. When the
device detects that the
upstream USB connection
has been established,
either at startup or after a
USB disconnection, it will
revert to the default PTZ
settings.
Camera's flicker setting.
144