Call; Call Statuses; Status - Yamaha CS-700 Series Integrators Reference Manual

5.2.5

Call

5.2.5.1

Call Statuses

status

Description: Query a call status.
Property Actions: get, notify
Command Definition:
Action Definition
Get get status <1..3|usb|bt>
Response val status <1..3|usb|bt> <"call-status">
Notify notify call.status <1..3|usb|bt> <"call-status">
Parameters:
Parameter Description
1
VoIP line 1
2
VoIP line 2
3
VoIP line 3 (used for transfer)
usb
USB line
bt
Bluetooth line
call-status
String as shown below for each call type.
VoIP Calls
idle
Initialization state.
incoming
Receiving incoming VoIP call.
calling
Initiating outgoing VoIP call.
failed
Outgoing call attempt failed; it is followed by "disconnected" when the attempt is
disconnected.
connected
Call is connected.
onhold
Call is on hold.
connected-in-
Call is in a conference.
conf
disconnected
Not in a call or phone is not registered.
update
The call is transferred by the far end (with some call managers the call state will remain
"connected" after the transfer).
missed
Incoming VoIP call missed due to Do-Not-Disturb.
USB Calls
active
USB audio is active.
idle
Initialization state.
incoming
Incoming USB call signal is received from host.
inactive
USB audio is not active.
connected
Call is connected.
onhold
USB audio is on hold.
connected-in-
Call is in a conference.
conf
BT Calls
Yamaha CS-700 Integrators Reference Guide 76