Elation Artiste Monet User Manual page 26

S Y S T E M M E N U
EFFECT ADJUST – Calibration
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION!
This function allows small adjustments to be made to the Pan, Tilt, and Zoom movements
to compensate for ware or in the event a sensor has been knocked slightly out of place.
Because improper use of this function can result in undesired operation this function has
been password protected. The password is 050 and must be entered each time the
calibration menu function is entered. Because calibration is an extremely delicate procedure,
instructions on performing this action are left out of this manual. For a first-time calibrator,
please contact our customer support team for step-by-step instructions.
EDIT PROGRAM – Rec. Controller
The fixture features an integrated DMX-recorder by which you can transmit the programmed
scenes from your DMX-controller to the moving head. Adjust the desired scene numbers via
the encoder (from – to). When you call up the scenes at your controller, they will
automatically be transmitted to the moving head.
EDIT PROGRAM – Record Controller – Working with Built-In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit
can start 3 different Slave units, which run 3 different programs. The Master unit sends the
3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave
unit was assigned to. If e.g. a Slave unit is set to "Slave 1" in the menu "Set to Slave", the
Master unit sends "Auto Program Part 1" to the Slave unit.
If set to "Slave 2", the Slave unit receives "Auto Program Part 2".
26