Statement Of Conformity; Notes And Warnings - Siemens CC-2M Directions For Use Manual

English 7XV5662-0AD00

Statement of Conformity

This product complies with the directive of the Council of the European Communities on the
approximation of the laws of the member states relating to electromagnetic compatibility
(EMC Council Directive 89/336/EEC) and concerning electrical equipment for use within
specified voltage limits (Low-Voltage Directive 73/23/EEC).
This conformity has been proved by tests performed according to Article 10 of the Council
Directive in agreement with the generic standards EN 61000–6–2 and EN 61000–6–4 (for
EMC Directive) and with the standard EN 60255–6 (for Low-Voltage Directive) by
Siemens AG.
The device is designed and manufactured for application in industrial environment.
The product conforms with the international standards of IEC 60255 and the German
standards VDE 0435.

Notes and Warnings

The warnings and notes contained in this booklet serve for your own safety and for an
appropriate lifetime of the device. Please observe them!
The following terms are used:
DANGER
indicates that death, severe personal injury or substantial property damage will result if
proper precautions are not taken.
Warning
indicates that death, severe personal injury or substantial property damage can result if
proper precautions are not taken.
Caution
indicates that minor personal injury or property damage can result if proper precautions are
not taken. This is especially valid for damage on or in the device itself and consequential
damage thereof.
Note
indicates information about the device or respective part of this booklet which is essential to
highlight.
32 C53000-B1174-C205-1