1- Unpack The Battery Box - NEC XN120 Getting Started

Unpack the Battery Box

1- Unpack the Battery Box

The battery box is a universal part that can be used to provide battery backup for other NEC products therefore,
there are parts supplied that are not required when used with the XN120.
The battery box is supplied with the following items.
Battery box with approximately 2.5 metres of connecting cable attached.
3 screws for securing the box to the wall
Battery retaining bar with 2 fixing brackets.
2 wing nuts for the battery retaining bar.
2 Orange cables (1 required when used for the XN120)
1 red/blue two terminal connecting cable (required when used for the XN120)
1 red/blue four terminal connecting cable (not required when used for the XN120)
1 spare fuse (20mm 4 Amp, taped to the inside of the battery box)
Additional Items Required:
Cross head screwdriver.
Screws and wall plugs if wall mounting the battery box.
2 Batteries (12V 2.6Ah)
XN120 Battery Box Guide 5