Configuring Print Server - Siemens FS20 Application Manual

8 Configuring print server

Building Technologies
Fire Safety
The print server's IP address must be in the corresponding address range of the
Ethernet (system) and is defined on the print server.
The print server must be configured before connecting to the Ethernet (system).
Settings on the print server
Subnet screen 255.255.255.0 (basic setting)
IP address for print server PS01a in the range between 192.168.200.6 and
192.168.200.254
Entering IP address
The print server is not linked to the Ethernet (system).
The print server is linked to a PC.
Administration using an Internet browser or InterCon NetTool is possible.
1. Set the IP address for the PS01a print server.
See http://www.seh.de/support_forum/viewtopic.php?t=104).
2. Check that the IP address is issued correctly.
The print server is ready for connection to the Ethernet (system).
The printer can be connected to the Ethernet (system) via the print server.
Configuring print server
A6V10224853_c_en_--
03.04.2012
8
15