Configuration With Sintesoworks/Cerberus Engineering Tool - Siemens FS20 Application Manual

7

Configuration with SintesoWorks/Cerberus Engineering Tool

7 Configuration with SintesoWorks/Cerberus
14
Building Technologies
Fire Safety
Engineering Tool
The 'external printer' element is created in SintesoWorks/Cerberus Engineering
Tool.
The document 'Configuration' in the FS20/FS720 documentation includes how to
create an 'external printer' element in the FS20/FS720 fire detection system.
1. Create an 'external printer' element in the 'Operation' register.
2. Define the 'visibility' for the printer.
3. Link the printer to the intended connection
- 'RS232 interface'
or
- 'Ethernet printer'
A6V10224853_c_en_--
03.04.2012