Turn On Do Not Disturb For A Specific Line - Cisco 7832 User Manual

Settings
Procedure
Step 1 Press Settings .
Step 2 Select User Preferences > Call Preferences.
Step 3 Select On to enable call forwarding.
Step 4
Enter a phone number for each of the call forwarding services that you want to enable:
• Forward all number: Forwards all incoming calls to a target phone number.
• Forward busy number: Forwards all incoming calls to a target phone number when the primary line
• Fwd no answer number: Forwards an incoming call that is not answered.
• Fwd no answer delay: Assigns a response delay time.
Step 5 Press Set.

Turn On Do Not Disturb For a Specific Line

Set do not disturb (DND) to silence your phone and suppress incoming call notifications when you need to
avoid distractions. You can suppress all incoming call notifications or you can suppress a specific caller
notification.
Procedure
Step 1
Press Settings .
Step 2 Select User preferences > Call preferences > Do not disturb.
Step 3 Select a specific line from the list.
Step 4 Press On to turn on DND or press Off to turn off DND.
is active.
If your administrator disables the feature key synchronization (FKS) on your phone, you can enter the
value as number of seconds after which call needs to be forwarded.
If your administrator enables feature key synchronization (FKS) on your phone, you can enter the value
as number of rings after which call needs to be forwarded.
Turn On Do Not Disturb For a Specific Line
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
45