Henny Penny LVG-202 Technical Manual page 29

5 5 . . 4 4 A A l l e e r r t t T T o o n n e e & & V V o o l l u u m m e e
Press and hold the temp and info buttons until "LEVEL - 2" shows in the display,
1 1 ) )
followed by "ENTER CODE".
Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD" and "COMP" show in the
2 2 ) )
displays.
Press the down arrow 3 times and "ALERT TONE" shows in the display.
3 3 ) )
Press right "✓" button and "VOLUME" shows in the display, along with the
4 4 ) )
volume value. Use the product buttons to set the volume from 1 (softest) to 10
(loudest).
Once volume is set, press "✓" button and "TONE" shows in display, along with
5 5 ) )
the tone value. Use the product buttons to set the tone from 50 to 2000 Hz.
Press "X" to exit Alert Tone Mode.
6 6 ) )
5 5 . . 5 5 F F i i l l t t e e r r A A f f t t e e r r
This is the number of cook cycles between filters.
Press and hold the temp and info buttons until "LEVEL - 2" shows in the display,
1 1 ) )
followed by "ENTER CODE".
Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD" and "COMP" show in the
2 2 ) )
displays.
Press the down arrow 4 times and "FLTR AFTR" shows in the display, along
3 3 ) )
with the filter after value. Use the product buttons to set the number of cook
cycles before the controls suggest filtering, 0 to 99.
Once set, press "✓" button to confirm.
4 4 ) )
5 5 . . 6 6 F F i i l l t t e e r r T T i i m m e e
This is the amount of time fryer sits idle until filter is suggested.
Press and hold the temp and info buttons until "LEVEL - 2" shows in the display,
1 1 ) )
followed by "ENTER CODE".
Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD" and "COMP" show in the
2 2 ) )
displays.
Press the down arrow 5 times and "FLTR TIME" shows in the display.
3 3 ) )
Use the product buttons to set the time the fryer sits idle before the controls
4 4 ) )
suggest filtering, 0 to 18:00 (18 hours). For example, if "5:00" is programmed in
the right display, if the vat was idle for 5 hours after a cook cycle, the controls
would display "FILR NOW?" "YES NO".
Once set, press "✓" button to confirm.
5 5 ) )
21