Maintenance - ATD Tools ATD-7343 Owner's Manual

Support the vehicle with appropriate jack stands.
Li the vehicle to remove the jack stands, ensuring that there are no persons or obstruc ons under the vehicle.
Turn the handle counter clockwise.

MAINTENANCE:

Important: Both the maintenance and repair of the jack may only be performed by quali ed persons, who have su cient
knowledge of the hydraulic system used in these jacks
Regularly lubricate the moving parts in the wheels, arms, handle and pump roller pin.
Only original replacement parts should be used.
EXTREMELY IMPORTANT:
hydraulic system. Use ONLY quality hydraulic jack oil for lubric on and ling of the hydraulic system.
When the jack is not in use, make sure the li ing arm is fully retracted to avoid corrosion.
Replace the hydraulic
arm completely.
The hydraulic
maximum height. Replenish if necessary, and reinstall the rubber ller plug. Do not over ll the jack. Excessive
hydraulic oil may render the jack inopera ve.
Inspect the jack before each use. Take correc ve
problems are found:
A. Cracked or damaged frame
B. Leaking hydraulic
C. Scored, damaged piston rod
D. Loose hardware
E. Modi ed equipment
Keep warning labels and instruc onal decals clean and readable. You may use a mild soap solu on to wash external surfaces
of the jack.
NEVER use brake
d in the reservoir at least once a year. To check the hydraulic
d level should be just below the ller plug. If the oil is too low, the jack will not raise to its adver sed
d
d OR transmission uid for lubrica on, or for
on or remove the jack from service if any of the following
ing the
d level, lower the