Related Manuals for ATD Tools ATD-7350A
Summary of Contents for ATD Tools ATD-7350A
- Page 1 ATD-7350A 10-Ton Air Jack/Support Stand Owner’s Manual Features: Specifications: ATD7350A_rev_0319 Visit us at www.atdtools.com...
-
Page 2: Safety And General Information
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING SAFETY AND GENERAL INFORMATION Save these instructions. read, understand, and follow Inspect before each use. - Page 3 PREPARATION Before Use: Assemble Handle: Prepare Air System: CAUTION: Air source must not exceed 200 psi maximum. WARNING: Never use more than one extension with this unit. Using more than one extension causes the load to be lifted beyond the maximum designed safety lifting height, which could cause loss of load. Check the Jack:...
-
Page 4: Operation
OPERATION Lifting: WARNING: Only attachments and/or adapters supplied by the manufacturer shall be used. WARNING: Do not connect two jacks to one control valve. Operating the jacks in this way can cause of loss of control during raising and lower the vehicle. r’... -
Page 5: Troubleshooting
Lowering: WARNING: Check that all tools and personnel are clear before lowering load. Maintain control of speed at which load descends at all times. TROUBLESHOOTING Symptom Possible Causes Corrective Action MAINTENANCE... -
Page 6: Replacement Parts
REPLACEMENT PARTS... - Page 7 ITEM# ORDERING PART# DESCRIPTION PRT7350A-01 SADDLE PRT7350A-02 EXTENSION TUBE PRT7350A-03 LOCK PIN PRT7350A-04 LOCK PIN PRT7350A-05 PRT7350A-06 COVER PLATE PRT7350A-07 SUPPORT RING PRT7350A-08 PISTON PRT7350A-SK SEAL RING PRT7350A-SK SEAL RING PRT7350A-11 PLATE PRT7350A-SK O-RING PRT7350A-13 BOLT PRT7350A-14 AIR HOSE PRT7350A-15 AIR HOSE FITTING PRT7350A-16 AIR VALVE...
-
Page 8: Warranty
WARRANTY 1 YEAR LIMITED WARRANTY THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES...
Need help?
Do you have a question about the ATD-7350A and is the answer not in the manual?
Questions and answers