8.
Touch the back arrow <- to exit the screen.
Note:
You will not be prompted to confirm the delete action, so please take care when using this feature.
•
If you delete or rename a WAV file, it will no longer be available for use by presets that were previously using it. The
•
name of the original WAV file will still appear in the Preset, but the Waveform screen will be blank until you load a
new WAV file into the pad.
To remove a WAV file from a pad without deleting the file, go to the Waveform screen and touch the Pad Mode
•
icon to the left of the file name, and then touch New Recording. You can press PADS to go back to the Pads
screen without loading a file and the pad will be empty.
WAV file names may use Alpha Numeric Characters (A-Z, 0-9) and some special characters. The following characters
•
are NOT allowed: double quotes, forward slash, back slash, question mark, asterisk, less than and greater than
symbols, the colon and the pipe symbol (" / \ ? * < > :
including the path name. Files that do not conform to these naming constraints will not be recognized by blackbox.
4/10/19 6:08 PM
Page 24 of 49
BLACKBOX USER MANUAL v 0.9.8
|). File names must be less than 256 characters,
Copyright 1010music LLC 2019