1010music Blackbox User Manual page 14

Hide thumbs Also See for Blackbox:
Table of Contents

Advertisement

3.
On Pad Parameters Screen 1, there are four menu items below the measure and
beat count. The left most item is the grid icon. The second menu item is the
output selection button (Out1 in the example screenshot). Touch this menu
item to display the list of output options:
Output
Description
Option
Out1,
The output of this pad is sent to selected output in stereo.
2, 3
Out1L,
The output of this pad is sent to the left or right stereo
1R, 2L,
channel of the selected output.
2R, 3L,
3R
FX1
Send the signal to FX1 for processing. The output of FX1 then
goes to Out1.
FX2
Send the signal to FX2 for processing. The output of FX2 then
goes to Out1.
Note:
The PHONES output will always contain a mix of all of the outputs.
4.
Touch the desired output option to select it.
5.
The next menu item (Poly in the example screenshot) controls the polyphony of the pad. Touch the menu option to
select Polyphonic or Monophonic playback for this pad. Sample pads support 4-note polyphony. Clip mode and
Slicer mode support 2-note polyphony.
6.
The last menu item displays an abbreviated version of the WAV file name (KI O in the screenshot). Touch this
menu item to start playback of the pad. The playback functionality will depend on the other parameter settings.
The WAV file is playing when this menu item is highlighted blue.
7.
As you push INFO, blackbox will cycle through the Pad Parameter screens and the WAV screen. Some of the pad
parameters are the same for all Pad Modes, while others vary by mode. Touch the control knob closest to each of
the parameter to set its value. Here are the parameters that are the same for all Pad Modes:
Parameter
Level
Pitch
Filter
4/10/19 6:08 PM
Page 13 of 49
Description
Adjusts the loudness level of
the pad
Adjusts the pitch of the pad up
or down
Applies either a high pass or
low pass filter to this pad.
BLACKBOX USER MANUAL v 0.9.8
Range of Values
-96.0 to +12.0 db
-24.0 to +24.0 semitones
-100% to +100%
Negative values apply a low pass filter. Positive
values apply a high pass filter.
Copyright 1010music LLC 2019
P ad Pa r amet ers Scr een 1
Mod
Target?
Yes
Yes
No

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents