1010music Blackbox User Manual page 10

Song Button
Mode? Pressed
Enabled STOP
Disabled PLAY
Disabled REC + PLAY
Disabled STOP
To record a song section, select the section you want to record into and then hold REC while you press PLAY. Any
sequences that are active at this time will start to play and be recorded into the section. Touch sequence cells to activate
and deactivate them and add them to the section. If you record on top of a previously recorded section, it will add to the
content that is already there.
If you want to save the work you have done so far, push PSET, touch File and then touch Save or Save As. If you choose
Save As, you will have a chance to save to a new preset so you don't overwrite the original preset. Note that blackbox does
not automatically save changes as you work. If you don't save your changes, the preset will remain in its original state on
your microSD card when you load a different preset, create a new preset or power down blackbox.
Hopefully, that's enough to give you a feel for what blackbox can do. We will dive into more detail about each of the
functional areas of blackbox next.
4/10/19 6:08 PM
Page 9 of 49
Action
Stop playing and recording all sections and sequences.
Play any active sequences. You can start and stop sequences while playing. The
sequences will play in a loop until you press STOP or deactivate them.
Play any active sequences and record any PADS or KEYS entries into the currently
selected sequence. This is recorded as an overlay so you can add to a sequence
over time. The sequences will play and record in a loop until you press STOP or
deactivate them.
Stop playing and recording all sequences.
BLACKBOX USER MANUAL v 0.9.8
Copyright 1010music LLC 2019