Table of Contents
Advertisement
Wipe protection
The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The is not locked.
Activating
Touch the sensor.
The time will count down in the timer
display.
Deactivating
Touch the sensor until the timer
display goes out.
Demonstration mode
This function enables the hob to be
demonstrated in showrooms without
heating up.
Activating / Deactivating
Switch the hob on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 2 sensors at
the same time for 6 seconds.
In the timer display, flashes altern-
ately with (demonstration mode ac-
tivated) or (demonstration mode de-
activated) for a few seconds.
Additional functions
Displaying hob data
The model number and software ver-
sion of the hob can be displayed. There
must not be any pots or pans on the
hob.
Model designation
Switch the hob on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 4 sensor con-
trols at the same time.
The timer display shows 2 numbers
flashing alternately:
Example: flashing alternately with
= KM 1234
Software version
Switch the hob on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 3 sensor con-
trols at the same time.
Numbers appear in the timer display:
Example: : = Software version 2.00
43
Advertisement
Table of Contents
