Messages Displayed When Using The Facsimile Function - Ricoh Aficio MP C2030 Operating Instructions Manual

Messages Displayed When Using the Facsimile
Function
This section describes the machine's main messages. If other messages appear, follow their instructions.
Message
"Authentication failed."
"Authentication failed."
"Cannot detect original size.
Place original again, then
press Start key."
"Connection with LDAP
server has failed. Check the
server status."
"Error occurred, and trans.
was cancelled."
"Exceeded max. number of
search results which can be
displayed. Max.:n"
(A figure is placed at n.)
Cause
The entered login user name
or login password is not
correct.
The machine cannot perform
authentication.
The machine failed to detect
the size of the original.
A network error has occurred
and connection has failed.
• Original jammed during
Immediate Transmission.
• A problem occurred in
the machine, or noise
occurred on the
telephone line.
The number of search results
has exceeded the maximum
number of items that can be
displayed.

Messages Displayed When Using the Facsimile Function

Solution
Inquire the user administrator for the
correct login user name and login
password.
Contact the administrator.
Place original again, and then press
[Start] key.
• Try the operation once more. If the
message is still shown, the network
may be crowded.
• In [System Settings], under
[Administrator Tools], check the
settings of LDAP server. For details,
see "Programming the LDAP
server", Network and System
Settings Guide
Press [Exit], and then send the
documents again.
Search again after changing the search
conditions.
3
.
39