Installation Requirements; Clearance Requirements - Vermont Castings Radiance RADVT Series Installation & Operating Manual

B. Installation Requirements
The installation must conform with local codes or, in the
In Canada, installation must be in accordance with the current
techniques appropriate for your area to accomplish a safe
children should be watched carefully when they are in the
Improper installation, adjustment, alteration, service
or maintenance can cause injury or property damage.
Refer to this manual. For assistance or additional
information consult a qualified installer, service
agency or the gas supplier.
In choosing a location for the stove, consider:
• The location of outside walls;
•
•
•
NOTE:
to shrink, or may adversely affect the binders in the wallpaper
This appliance is for use only with the type of gas
indicated on the rating plate. This appliance is not
kit is used.
66
WARNING
WARNING
Vermont Castings • Radiance RADVT Installation Manual_R20 • 09/18
Direct Vent System Only
A
E
Figure 2.2
C. Clearance Requirements
The Radiance heater is approved for installation into an alcove
constructed of combustible materials to the dimensions and
•
• Refer to the manufacturer's instructions included
D
B
C
WARNING
3-90-20306759