Setting Up An External Strobe; About Fiber Optic Cords - Ikelite 6146.07 Instructions Manual

For canon powershot g7 x

Hide thumbs Also See for 6146.07:

Table of Contents

3. Orient the diffuser as shown.

4. Remove the diffuser by pulling it away from the port.

A small hole in the corner of the flash diffuser allows it to be

attached to your system using a thin string (not included). It

is recommended to attach the flash diffuser to your system to

avoid accidental loss.

Setting Up An External Strobe

We recommend attaching an external strobe for the optimal color and

clarity in a wide variety of photographic situations, including daylight

photography.

This housing provides fiber optic ports for optical triggering of up to

two strobes.

Connecting a strobe via fiber optic cord requires the camera's built-in

flash to fire for every photo. Rapid firing will be limited to the recycle

time of the camera's built-in flash or the recycle time of the strobe,

whichever is slower.

The following fiber optic cords are compatible with this housing:

Table of Contents