Using The Built-In Flash; Using The Flash Diffuser; Installing The Flash Diffuser - Ikelite 6146.07 Instructions Manual

For canon powershot g7 x

Hide thumbs Also See for 6146.07:

Table of Contents

Using the Built-in Flash

The camera's built-in flash may be used to illuminate subjects

underwater.

Install the semi-transparent diffuser when using the camera's built-

in flash. A portion of the camera's built-in flash may be blocked by

the housing's lens port. The diffuser spreads the light of the flash to

reduce any effects on the image.

It may be necessary to zoom in when shooting close-up photos to

completely eliminate any darkened areas.

1. The flash deflector must be removed to use the camera's built-

in flash to illuminate a photo. If a deflector is installed, lift the

bottom with your thumb or a dull instrument and pull away from

the housing. The deflector must be removed prior to inserting the

camera in the housing.

2. Press the large opening of the flash diffuser over the housing's

lens port until it snaps into the groove in the outer circumference of

the port. The piece may bend during installation.

Table of Contents