Shutting Down The System - Sony SRX-R815P Operating Instructions Manual

Shutting Down the
System
1
Tap on the upper right of the screen.
2
Select [Shutdown], and then tap [OK].
3
Tap [OK] when the confirmation screen appears.
The projection system will shut down.
The MAIN indicator and LIGHT indicator on the rear
of the projector will turn to blinking green while
cooling. Once cooling is complete, the LIGHT
indicator will turn to solid red. Leave the system as it
is at this point.
4
Once the MAIN and LIGHT indicators turn solid red,
and the IMB indicator begins blinking red, move the
power switch to off (a) to turn off the power.
Caution
If, after shutdown, the power switch on the rear of the
projector is not turned off and only the server is turned on,
the IMB on the projector will not power on. If this happens,
the IMB indicator will blink red. Turn the power switch
off, and then turn the power on again.
15