Ingesting From Hdd Via Cru Dataport; Ingesting Via Network - Sony SRX-R815P Operating Instructions Manual

To check ingested DCP
Ingested DCP can be checked in the "Library" screen's
[Local Folder] list.
Select [DCP] to display DCP ingested to the server in a list
in the [Current Auditorium] pane.
The following operations are available for each button in
the [Local Folder] list.
[Edit]: The name of the selected DCP can be changed.
[Details]: Detailed information on the selected DCP will
be displayed.
[Delete]: The selected DCP can be deleted.
Tip
To refresh the displayed content, tap
Ingesting from HDD via CRU
DATAPORT
A CRU DATAPORT carrier is necessary to use the CRU
DATAPORT. For further details, contact qualified Sony
service personnel.
1
Insert the HDD containing DCP to the server's CRU
DATAPORT.
2
For further instructions, follow steps 2 to 6 in
"Ingesting from HDD via USB Connector" (page 16)
to ingest DCP.
To remove the HDD
Perform the following to remove the HDD.
1 Press the power button.
2 Verify that the LED is off, push the left side of the

Ingesting via Network

DCP stored on another server can be ingested via network.
.
Caution
To ingest DCP via network, it is necessary to register the
source device ahead of time.
For further details, refer to the "Installation Manual."
To ingest DCP, follow steps 2 to 5 in "Ingesting from HDD
via USB Connector" (page 16).
In step 3, select the source device in the [External Folder]
pane.
18
In step 3 and 6, select [Ingest_SATA] in the [External
Folder] pane.
2
The LED blinks for a moment and then turns off.
handle, and remove the HDD.
1