Setting An Intermission In The Spl - Sony SRX-R815P Operating Instructions Manual

10
Adjust the settings, and tap [Apply].
To set an intermission, see "Setting an Intermission in
the SPL" (page 25).
The setting will be saved and added to the SPL list.
To change the content of an SPL
Select the SPL you want to change from the SPL list and
tap [Edit]. The SPL setting screen will be displayed, and
you can change the content there.
For further details, see step 3 and beyond of "Creating an
SPL" (page 23).
To copy an SPL
You can copy the content of a SPL, add a different title, and
use it to create a new SPL.
1
In the SPL list, select the copy source, and then tap
[Copy].
2
Enter the SPL title, and then tap [Apply].
The SPL will be created.
To delete an SPL
In the SPL list, select the SPL you want to delete, and then
tap [Delete]. Once the confirmation message is displayed,
tap [OK] to delete the SPL.
Procedures for importing/exporting SPL
You can import and use an SPL that was created on another
projection system, and export schedules created on the
current projection system.
Tip
SPL import and export can only be performed from a
computer.
Exporting an SPL
Select the SPL and click [Export]. When the download
screen of the browser appears, save the file.
Normally, the file is saved to the downloads folder. After
downloading is complete, we recommend renaming the
file to a name that is easy to remember.
Importing an SPL
Click [Import]. When the upload screen of the browser
appears, select the SPL file and click [Open].
Tip
When you click [Import], a dialog will be displayed.
• To assign a new UUID when importing an SPL, select
"New SPL UUID".
• To use the same UUID as when exporting, select "Old
SPL UUID".
• When importing an SPL that contains a Sub SPL, select
"Old SPL UUID" and import the Sub SPL first.

Setting an Intermission in the SPL

You can set an intermission anywhere in the CPL
registered to the SPL.
To set an intermission, insert the intermission at the desired
position while playing back the CPL.
1
In the SPL list, select the SPL you want to add an
intermission to, and then tap [Edit].
The SPL setting screen will be displayed.
25