Preparations For Using The Networking Function; System Configuration - Sony VPL-PX15 Operating Instructions Manual

Preparations for Using the Networking Function

This section describes the tasks that are required for
using the networking function of the projector.

System Configuration

For details on connections, refer to the Operating
Instructions of the projector.
Connecting to LAN using the LAN cables
or LAN PC card
LAN cable
LAN cable
to
Hub/router
LAN PC card (recommended)
(NE2000 compatible)
Rear of the VPL-FE110U/M
LAN
cable
PC CARD
slot
Left side of the VPL-PX15
LAN
cable
ETHER
connector
LAN cable
6
(GB)
Computer
Computer
Front of the VPL-FX50
Computer
Connecting to wireless LAN using the
wireless LAN access point
Wireless LAN PC card
(recommended)
(IEEE802.11b compliant)
Wireless LAN access
point (recommended)
(IEEE802.11b compliant)
PC CARD slot
to Hub/router
Wireless LAN PC
card (recommended)
(IEEE802.11b
compliant)
Connecting to wireless LAN without using
the wireless LAN access point (Peer to
Peer mode)
PC CARD slot
Wireless LAN PC
card (specified)
(IEEE802.11b
compliant)
Wireless LAN PC
card (recommended)
(IEEE802.11b
compliant)
Using the memory card
PC CARD slot
PC memory
card (Type II)
Computer
Wireless LAN PC card
(specified)
(IEEE802.11b compliant)
Projector
Computer
Projector
Computer
Projector