Ingesting Kdm; Ingesting From A Usb Flash Drive - Sony SRX-R815P Operating Instructions Manual

Ingesting KDM

When DCP is encrypted, it is necessary to also ingest the
KDM encryption key file to the server.
When DCP is encrypted, a key icon will be displayed on
any CPL containing DCP.
DCP can be opened in the "Library" screen.
Key icon
KDM can be ingested in the following ways.
• Ingesting from a USB Flash Drive (page 19)
• Ingesting from a Network Folder (page 20)

Ingesting from a USB Flash Drive

Caution
Do not start up the server with a USB devise inserted in
INGEST PORT1/2 connector on the front of the server.
The USB device may not be recognized.
1
Connect the USB flash drive containing the KDM to
the server's INGEST PORT 1/2 connector.
2
Tap the [Library] tab, and then tap [Library].
The "Library" screen will be displayed.
3
In the [External Folder] pane, select the following
terminals connected to the USB memory device, and
then tap [Open].
• When connected to INGEST PORT 1 terminal,
select [Ingest_USB_1].
• When connected to INGEST PORT 2 terminal,
select [Ingest_USB_2].
The content on the USB memory device connected to
INGEST PORT 1/2 will be displayed.
4
Select the KDM (
[Ingest].
Tip
To refresh the displayed content, tap
The selected KDM is ingested to the server.
Tap [OK] to close the message.
5
Confirm that the ingested KDM has been applied to
the DCP.
For further details, see "To confirm that KDM has
been applied" (page 20).
Tip
You can ingest KDM from the CRU DATAPORT. For
instructions, see steps 1 to 2 in "Ingesting from HDD via
CRU DATAPORT" (page 18), and steps 1 to 4 in
"Ingesting from a USB Flash Drive" (page 19). For steps
19
) to import, and then tap
.