Replacing The Lens Using The Lens Change Table - Sony SRX-R815P Operating Instructions Manual

Replacing the Lens Using
the Lens Change Table
As an example, this section describes how to switch from
the 2D lens to the 3D lens. To switch from the 3D lens to
the 2D lens, perform the procedure in reverse.
1
Raise the stopper on the 2D lens table, and slide the
table until it is under the 2D lens.
2
Lower the stopper and slide it until it contacts the
inner side of the lens base.
Stopper
Lens base
Stopper
3
Slide the lock lever in the direction of the arrow, and
lock the lens.
4
With the lock button pushed all the way in (lock
released), and lift the lens fixing lever toward
Caution
If you lift the lens fixing lever without pressing the
lock button, the lock button and lever will be
damaged. Be sure to press the lock button and make
sure the lock is released before lifting the lever.
5
Grip the lens base handle and lens flange, and pull the
lens toward you to remove the lens.
34
Lock lever
Lens fixing lever
Lock button
Lens flange
Handle
Lens base
.