Toshiba RAS-M10U2MUVG-E Service Manual page 78

Using the Service monitor with the [
Room A
Cool
Mode
Monitor Function
Code
00
Return
Refer to "3. Monitor function" for details.
2. Function selection setup
Perform the advanced settings for the air conditioner.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting
the setting operation.)
Field setting menu ( 2/2 )
6.FC setting
Return
FC setting
Code
(FC)
10
Return Fix
<
FC setting
Code
(FC)
10
Return Fix
<
FC setting
Continue?
Return
Yes
12:00
Test
Fan Speed
Data
0024
Set
Data
0000
>
Data
0001
>
No
MONITOR] button during the test mode
Push the [ MONITOR] button
1
Push the [
"6. FC setting" on the "Field setting menu"
screen, then push the "
button.
→ The fan of the indoor unit operate.
→ Move the cursor to select "Function code" with the
"
<
code" with the [
→ Move the cursor to select "data" with the
"
>
[ ] / [
2
Refer to the Installation Manual supplied with the
indoor unit or service manual for details about
the Function code and data.
3
Push the [
Function codes. After "Continue?" is displayed on
the screen, push the "
button.
4
Push the "
the setting operation. " " appears on the screen
for a while, then the screen returns to the "Field
setting menu" screen.
– 78 –
Field setting menu(1/2)
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Return
Set
] / [ ] button to select
<" [ F1] button, then set "Function
] / [ ] button.
>" [ F2] button, then set "data" with the
] button.
MENU] button to set the other
Yes" [
Yes
No" [ F2] button to finish
No
Set" [ F2]
F1]