Additional Operation - Toshiba RAS-M10U2MUVG-E Service Manual

Item
1. QUIET mode
13. Additional
Operation When the [QUIET] button is pushed, the fan of the indoor unit will
be restricted the revolving speed at speed L until the [QUIET]
button is pushed once again (cancel Quiet mode).
2. Hi-POWER Mode
([Hi-POWER] button on the remote controller is pushed)
When [Hi-POWER] button is pushed while the indoor unit is in
Auto, Cooling or Heating operation, Hi-POWER mark is indicated
on the display of the remote controller and the unit operates as
follows.
1. Automatic operation
• The indoor unit operates in according to the current operation.
2. Cooling operation
• The preset temperature drops 1˚C
(The value of the preset temperature on the remote controller
does not change.)
3. Heating operation
• The preset temperature increases 2˚C
(The value of the preset temperature on the remote controller
does not change.)
4. The Hi-POWER mode can not be set in Dry operation
3. ECO mode
When pushing [ECO] button on the remote controller, an Economic
operation is performed.
4. COMFORT SLEEP mode
Cooling mode
• The preset temperature will increase as ECO operation (Item
ECO mode)
• Push the [COMFORT SLEEP] button to choose the operating
hours. Repeat pushing to select the hours.
(1hr, 3hr, 5hr or 9hr)
• If the [COMFORT SLEEP] button is pushed again means cancel
comfort sleep mode.
Heating mode
• The preset temperature will drop down as ECO operation (Item
ECO mode)
• Push the [COMFORT SLEEP] button to choose the operating
hours. Repeat pushing to select thehours.
(1hr, 3hr, 5hr or 9 hr)
• If the [COMFORT SLEEP] button is pushed again means cancel
comfort sleep mode.
Operation flow and applicable data, etc
– 39 –
Description
Quiet mode is the system which,
control the revolving speed of
indoor fan to work constantly at
speed L.
Remarks :
1. Quiet mode is unable to work in
dry mode.
2.Quiet mode is appropriate to work
with less cooling load and less
heating load condition. Because
of the fan speed L may cause not
enough the cooling capacity or
heating capacity.
Quiet mode is the system which,
control the revolving speed of
indoor fan to work constantly at
speed L.
Remarks :
1. Quiet mode is unable to work in
dry mode.
2.Quiet mode is appropriate to work
with less cooling load and less
heating load condition. Because
of the fan speed L may cause not
enough the cooling capacity or
heating capacity.
1) Temperature control
Cooling operation
The control target temperature
increase 1˚C per hour up to 2˚C
starting from the set temperature
when ECO has been received.
Heating operation
The control target temperature
decrease 1˚C per hour up to 2˚C
starting from the set temperature
when ECO has been received.
2) The indoor fan speed : presetting
[AUTO] fan speed changes to L,
[MANUAL] fan speed does not
change.
3) Compressor speed is restricted
to silent mode max. Hz.
The principles of comfort sleep
mode are:
• Quietness for more comfortable.
• Save energy by changing room
temperature automatically.
• The air condition can shut down
by itself automatically.
Remarks :
1. Comfort sleep mode will not
operate in dry mode and fan
only mode.