Wireless Remote Controller; Remote Controller - Toshiba RAS-M10U2MUVG-E Service Manual

9-4. Wireless remote controller

1. Remote controller

• Illustration of LCD shown below is for explanation. It may differ from the actual LCD.
13
2
16
6
7
14
9
1
Infrared signal emitter
Transmits a signal to the indoor unit.
2
START/STOP button
Push the button to start operation.
(A receiving beep is heard.)
Push the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor
unit, push the button twice.
3
Mode select button (MODE)
Push this button to select a mode.
Each time you push the button, a mode is
selected in a sequence that goes from A : Auto
changeover control,
: Cool, : Dry,
back to A. (A receiving beep is heard.)
4
Temperature button (
...The set temperature is increased up to 30 °C.
TEMP
...The set temperature is dropped down to 17 °C.
TEMP
(A receiving beep is heard.)
5
Fan speed button (FAN)
Push this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature.
You can also manually select the desired fan
speed.
(LOW , LOW+
HIGH )
(A receiving beep is heard.)
6
Auto louver button (SWING)
Push this button to swing the louver.
(A receiving beep is heard.)
Push the SWING button to stop the louver
swinging.
(A receiving beep is heard.)
1
4
5
3
15
12
11
10
8
: Heat, : Fan only, and
)
TEMP
, MED , MED+
7
Set louver button (FIX)
Push this button to adjust the airflow direction.
(A receiving beep is heard.) It cannot be
operated by holding down the button. Push the
button with some interval.
8
Off timer button (OFF)
Push this button to set the OFF timer.
9
On timer button (ON)
Push this button to set the ON timer.
10
Reserve button (SET)
Push this button to reserve time settings.
(A receiving beep is heard.)
11
Cancel button (CLR)
Push this button to cancel ON timer and OFF
timer. (A receiving beep is heard.)
12
High power button (Hi-POWER)
Push this button to start the high power operation.
13
PRESET button
Push this button to change the operation mode
to the preferred operation mode memorized
previously. To memorize the operation mode,
push this button for at least 3 seconds during
the preferred operation mode.
is displayed and the operation mode is
memorized.
14
SLEEP button
Push this button to start the OFF timer operation
that automatically adjusts the room temperature
and the fan speed.
You can select the OFF timer time from four
durations
(1, 3, 5 or 9 hours).
15
COMFORT SLEEP button
Push this button to start the OFF timer operation
that automatically adjusts the room temperature
and the fan speed.
You can select the OFF timer time from four
durations
(1, 3, 5 or 9 hours).
,
16
QUIET button
Push this button to start quiet operation.
Pushing this button again will restore normal
operation.
– 44 –