How To Replace The Main Parts - Toshiba RAS-M10U2MUVG-E Service Manual

11. HOW TO REPLACE THE MAIN PARTS

WARNING
Be sure to stop operation of the air conditioner before
work and then turn off switch of the breaker.
No. Part name
Air intake 1. Detachment
grille
1) Stop operation of the air conditioner and then turn off
switch of the circuit breaker.
2) Loosen the fixing screw. And slide the fixing bracket
toward the inside. (Ø4 × 8, 1 pcs.)
3) Holding the air intake grille, slide the hook in the
direction of the arrow and slowly open the grille.
4) Remove the hook of the fall-preventive strap from the
ceiling panel. Remove the hinge section of the air
intake grille from the ceiling panel while the air intake
grille is opened.
2. Attachment
1) Hook the hinge of the air intake grille to the main
panel, and then attach the fall-preventive strap.
2) Close the air intake grille, and then slide the hook.
3) Slide the grille fixing bracket to fix it with the screws.
(Ø4 × 8, 1pc.)
1. Detachment
Electric
parts cover
1) Loosen the fixing screws (2 places) of the electric
parts cover. (Ø4 × 8, 2 pcs.)
2) Slide the electric parts cover toward upper side to
remove it.
2. Attachment
1) Slide the electric parts cover to attach it.
(Arrange the boss at the electric parts side just on the
boss hole at the cover side.)
2) Tighten the screws of the electric parts cover
(2 positions) to fix it. (Ø4 × 8, 2 pcs.)
Procedure
Hinge Hook of fall-preventive strap
Hook hole of ceiling panel
CAUTION
Be sure to put on gloves during working time;
otherwise an injury will be caused by a part etc.
Air intake grille
Close
Hook
– 61 –
Remarks
Open
Open
Slide direction
Close
Fixing bracket
Fall-preventive strap
Hinge
Electric parts cover
Hook
Boss part