Terminals; Parameter List - Mitsubishi Electric 800 Series Instruction Manual

3.2

Terminals


The operation of each relay depends on the output signal selected.
3.3

Parameter list

When the FR-A8AR is mounted on the inverter, the following parameters are extended.
Perform the settings as required.
Pr. Pr. Group
320 M420
321 M421
322 M422
418 M432
16
RELAY OUTPUT
Terminal symbol
1A
1B
1C
2A
2B
2C
3A
3B
3C
Name
RA1 output selection 0
RA2 output selection 1
RA3 output selection 2
Extension output terminal
9999
filter
Description
Normally open contact terminal of relay RA1
Normally closed contact terminal of relay RA1
Common contact terminal for relay RA1
Normally open contact terminal of relay RA2
Normally closed contact terminal of relay RA2
Common contact terminal for relay RA2
Normally open contact terminal of relay RA3
Normally closed contact terminal of relay RA3
Common contact terminal for relay RA3
Initial value
The setting range depends on the inverter. For details,
refer to Pr.190 to Pr.196 (output terminal function
selection) in the Instruction Manual (Detailed) of the
inverter.
5 to 50 ms, 9999
Setting range