Commissioning, General; Installing The Shelf Support Brackets; Figure 5-11 Shelf Support Bracket Installation - Thermo Scientific OGH 60 Series Operating Instructions Manual

Start-up

Commissioning, general

Commissioning, general

Installing the Shelf Support Brackets

1. Insert the shelf support brackets [3] into the perforations [1] of the support rail and air
baffle and tilt them downwards.
2. Make sure that the two vertical elements [2] of the shelf support bracket butt against the
support rail and air baffle.
Figure 5-11
5-8 Heratherm
Please note the alternating sequence of round and oblong holes. Be
sure to use the correct pair of opposite holes, so the support rails are
truly horizontal.
Shelf Support Bracket Installation
Horizontal position of support rails
Thermo Electron LED GmbH