Installing And Uninstalling The Lateral Air Baffles (Ogh Series And Ogh-S Series Only); Figure 5-6 Removing The Bottom Panel; Figure 5-7 Bottom Panel Removed - Thermo Scientific OGH 60 Series Operating Instructions Manual

Installing and Uninstalling the Lateral Air Baffles (OGH Series and
OGH-S Series only)
The following section describes the installation and removal of the lateral air baffles.
Figure 5-6
1. Losen the two screws [1] in the bottom panel, then remove the entire bottom panel by
lifting it out of its two embossings.
Figure 5-7
2. Grab the two retaining springs [1] at their tabs and pull them downwards out of the
embossings, then pull off the lateral air baffle.
Thermo Electron LED GmbH
Removing the Bottom Panel
Bottom Panel Removed
Start-up
Preparing the Work Space
Heratherm 5-5