Chapter 5 Start-Up; Installing The Shelf System; Initial Installation - Thermo Scientific OGH 60 Series Operating Instructions Manual

Start-up
Table-top ovens

Installing the Shelf System

The installation of the shelf system does not require any tools. The support rails are secured in
place by spring action. Once the shelf support brackets have been inserted into the rails, the
wire-mesh shelves can be simply pushed onto their support hooks to complete the installation.

Initial installation

Heratherm OGH and OGH-S Series ovens have the shelving support rails integrated with the
air baffles, which are readily pre-installed when the devices are shipped from the factory.
Heratherm OMH and OMH-S Series ovens come with separate support rails, which need to
be installed as follows:
1. Peel off the protective foil from the support rails.
2. Push the retaining spring [1] into the guide on the support rail [2], making sure that the
locking nub [3] on the retaining spring safely engages with the matching hole in the
support rail.
.
Figure 5-1
Thermo Electron LED GmbH
The support rails of the floor stand ovens cannot be removed.
Sliding the Retaining Spring into the Support Rail
5
Heratherm 5-1