Predisinfection - Thermo Scientific OGH 60 Series Operating Instructions Manual

Predisinfection

1. Remove all samples from the work space and store them in a safe place.
2. Spray disinfectant onto the surfaces of the work space and of the accessories or wipe the
surfaces clean using disinfectant.
3. Allow time for the disinfectant to act as specified by the manufacturer.
Thermo Scientific
The surfaces of the work space may be contaminated. Contact
with contaminated cleaning liquids may cause infections.
Disinfectants may contain harmful substances.
When cleaning and disinfecting, always observe the safety
instructions and hygiene guidelines!
• Wear safety gloves.
• Wear safety goggles.
• Wear mouth and respiratory system protection gear to protect your
mucous membranes.
• Observe the safety instructions of the disinfectant's manufacturer
and the hygiene supervisor.
Spray the sensor and other hard-to-reach components with
disinfectant!
Cleaning and Disinfection
Wipe / Spray Disinfection
Health hazard
Disinfecting hard-to-reach
components
Heratherm 9-3