Loading Scene Files - Sony DSR-400L Operating Instructions Manual

3
Press the MENU knob. Then turn the MENU knob
until x moves to the character position that you want
to select, then press the MENU knob.
Example: When entering the letter "+"
F04 SCENE FILE
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET ESC END
sSTANDARD
SCENE RECALL :
SCENE STORE :
F.ID :+TANDARD
4
Repeat step 3 for each of the remaining characters.
Note
Set the file ID before saving the scene file in the
"Memory Stick" or the camcorder memory.
Otherwise, the file ID is not saved with the other data.
5
When the input is complete, turn the MENU knob to
move x over END, then press the MENU knob.
The file ID is set, and the SCENE FILE page appears
again.
04 SCENE FILE
s1 :STANDARD
s2 :STANDARD
s3 :STANDARD
s4
:STANDARD
s5 :STANDARD
sSTANDARD
SCENE RECALL :
SCENE STORE :
F.ID: SCENE21
Carry out the procedure from step 2 in "Saving a scene
file" on page 113. The set file ID is saved together
with the data.
To select the display contents
You can select the items of file information to be displayed
on the SCENE STORE pages (P01 to P20) or the SCENE
RECALL pages (P01 to P20) used for saving data to or
loading data from a "Memory Stick".
For details to select the item, "To select the display
contents" on page 111.

Loading scene files

1
Display the SCENE FILE page of the FILE menu.
For details on menu operations, see "Basic menu
operations" on page 93.
2
To load the scene file stored in the camcorder, press
the MENU knob. Then turn the MENU knob to move
TOP
EXEC
EXEC
TOP
File ID
EXEC
EXEC
b to the desired file number, and press the MENU
knob again.
s on the left of the file number changes to x. The
camcorder is set up according to the loaded scene file.
F04 SCENE FILE
s1 :SCENE 25
x2 :SCENE 26
s3 :SCENE 27
s4 :SCENE 28
s5 :NO FILE
sSTANDARD
SCENE RECALL :
SCENE STORE :
F.ID :SCENE21
To cancel the selected scene file
Turn the MENU knob to move b to x, and press the
MENU knob. x changes to s. The camcorder returns
to the settings before selecting this scene file.
To load a scene file saved in the "Memory
Stick"
1 Turn the MENU knob to move b to SCENE
RECALL, and press the MENU knob.
The SCENE RECALL page appears.
?P00 SCENE RECALL
DISPLAY MODE :
MEM-1:STANDARD
MEM-2:STANDARD
MEM-3:STANDARD
MEM-4:STANDARD
MEM-5:NO FILE
2 Turn the MENU knob until the page which
contains the desired file appears.
3 Press the MENU knob. Then turn the MENU knob
to move b to the desired file number, and press the
MENU knob again.
The message "RECALL OK? YES b NO"
appears.
P01 SCENE RECALL
RECALL OK? YES NO
DISPLAY MODE :
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE LOAD
3
To carry out the recall, turn the MENU knob to move
b to YES and press the MENU knob.
To cancel, press the MENU knob leaving b pointing to
NO.
When the loading is completed, the message
"COMPLETE" appears. The camcorder is set up
TOP
EXEC
EXEC
ESC
F.ID
ESC
ALL
MEM1-5
Saving and Loading Scene Files
115