Chapter 2 Preparation; Attaching And Replacing The Lithium Battery - Sony DSR-400L Operating Instructions Manual

Preparation
Attaching and Replacing
the Lithium Battery
This camcorder uses a lithium battery to retain stored data.
When using the camcorder for the first time, be sure to
attach the supplied lithium battery (CR2032). The
camcorder will not operate correctly without this lithium
battery. After attaching the lithium battery, set the date and
time of the internal clock (see "Setting the date/time of the
internal clock" on page 105).
Notes
• Carefully read the instructions for attaching and
replacing the lithium battery. Lithium batteries can
explode if misused.
• Use only CR2032 Lithium Batteries. Other types of
lithium batteries may come loose when this camcorder is
moved. If you have difficulty finding CR2032 Lithium
Batteries, contact your Sony dealer.
1
1
Set the POWER switch to on.
2
Press down the catch at the top of the battery cover and
open the cover.
2
Catch
Press and pull
forward.
LITHIUM BATT
Battery cover
Chapter
3
Take out the lithium battery.
Press down and pull out
toward you.
4
Reverse step 3 to insert a replacement lithium battery.
Make sure that the + symbol on the battery is facing
you.
5
Close the battery cover.
Service life of the lithium battery
When the lithium battery's voltage falls, the lithium
battery power replacement warning appears on the LCD
monitor (page 24). If this warning appears, replace the
lithium battery ( CR2032) within three or four days.
Li
The lithium battery has an average service life of about one
year.

Attaching and Replacing the Lithium Battery

27