Vi.3. Acknowledge The Default « Timer Service; Maintenance - Caladair Freetime Series Operating And Commissioning Instructions

OPERATING AND COMMISSIONING INSTRUCTIONS
Internal battery
48
error
Sensor error
49
supply air temp
Sensor error
50
extract air temp
Sensor error
55
pressure VAS
Sensor error
56
extract VAR
59 CO2 sensor error
... in manual
85
mode
86 Time for service
... in manual
87
mode
VI.3. Acknowledge the default « timer service »
These settings require an access to the setting menu. You need the access rights to "service" level. Follow the instructions
below.
access rights
Enter the code 2222 with directional arrows then press the OK button. Press the left arrow twice to reach the menus. In case of
mistake press C button twice and start again.
Settings
An alarm occurs every 6 months to remind the maintenance visit. Enter YES to reset the counter to zero
VII.

MAINTENANCE

MS-CDF-010
Error battery intern A
Control the
A
Value on Ext AI1
Contrôler la
A
valeur sur Ext AI3
Control the value
A
on Ext UAI1
Control the value
A
on Ext UAI2
Control the
A
Value on Ext AI4
Functions are
modified in A
manual mode
Regular visit C
Functions are
modified in C
manual mode
Enter
Reset to zero
Filters counter
Ind F Maj. 18/05/2017
® -
FREETIME
High Efficiency Recovery Unit
Intern battery of the CORRIGO is disused
5s Change the battery quickly in order to not loose programm.
See chapter VII.2
Outside temperature sensor SSG is disused
5s Outside temperature sensor SSG is wrongly connected (see
chapter V.3.a)
Outside temperature sensor SRG is disused
5s Outside temperature sensor SRG is wrongly connected (see
chapter V.3.a)
0-10V signal is inverted
5s Pressure transmittor on fresh air is in short-circuit
0-10V signal is inverted
5s
Pressure transmittor on intake air is short circuited
0-10V signal is inverted
5s
CO2 transmittor is in short-circuit
5s In Manuel Auto menu everything must be in Auto.
5s See chapter VI.3
5s In Manuel Auto menu everything must be in Auto.
Enter password 2222
Of the required autoris. level:
Current level : SERVICE
filter alarm
Reset to zero of the
Timer : YES
Créé par : JC
®
HEXAMOTION
Validé par : AR Page 41/57