Cisco 8811 User Manual page 23

Your Phone
• Custom-Pending—The phone has downloaded a redirect URL from the EDOS server.
• Acquired—In the profile downloaded from the EDOS server, there is a redirect URL for provision
• Unavailable—Remote customization has stopped because the EDOS server responded with an empty
Procedure
Step 1 Press Applications
Step 2
Select Status > Product information > Customization.
Step 3
Press Back
View the Network Status
Procedure
Step 1 Press Applications
Step 2
Select Status > Network Status.
You can view the following information:
• Network type—Indicates the type of Local Area Netwrok (LAN) connection that the phone uses.
• Network status—Indicates if the phone is connected to a network.
• IPv4 status—IP address of the phone. You can see information on IP address, Addressing type, IP status,
• IPv6 status —IP address of the phone. You can see information on IP address, Addressing type, IP
• VLAN ID—VLAN ID of the phone.
• MAC address—Unique Media Access Control (MAC) address of the phone.
• Host name—Displays the current host name assigned to the phone.
• Domain—Displays the network domain name of the phone. Default: cisco.com
• Switch port link—Status of the switch port.
• Switch port config—Indicates speed and duplex of the network port.
• PC port config—Indicates speed and duplex of the PC port.
configuration. If the redirect URL download from the provisioning server is successful, this state is
displayed.
provisioning file and the HTTP response was 200 OK.
.
.
.
Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.
status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.
View the Network Status
Your Phone
23