Loop 8/9 Return; Loop 9 Send.r Split; Holding "Ia2/Mute" Switch - Musicom Lab EFX MK-V Owner's Manual

4.6.10 LOOP 8/9 RETURN

This sub-menu allows determining whether effect loop 8 and 9 are mono-return or stereo-return.
Line 2 - e indicates whether it is the LOOP8 or LOOP9.
Line 2 - s to x indicate whether the selected loop is MONO or STEREO.
1 & 2
3 & 4
ENTER/STORE (IA1/SETUP)
EXIT (IA2/MUTE)

4.6.11 LOOP 9 SEND.R SPLIT

This sub-menu allows determining whether the SND9L signal is split up in to the SND9R.
Line 2 - v to x indicate whether the LOOP9 SEND.R is SPLIT ON or OFF from the LOOP9 SEND.L
1 & 2
3 & 4
ENTER/STORE (IA1/SETUP)
EXIT (IA2/MUTE)
Note
When you use a Stereo IN/OUT effect pedal in the Loop 9, this menu must be O O N.
For the other side, when you use a Mono IN/Stereo OUT or Mono IN/OUT effect pedal in the Loop 9, this
menu must be O O FF.
4.6.12 HOLDING 'IA2/MUTE' SWITCH
This sub-menu allows determining whether the EFX MK-V enters to the IA2 mode or executes MUTE
function, by pressing & holding the IA2/MUTE for 1 second in the Preset mode.
Line 2 - u to x indicate the MUTE or IA2.
EFX MK-V Audio Controller Owner's Manual
Press to advance to the previous/next Utility menu.
Press to switch/toggle the MONO or STEREO.
Press to store any changes made while in this menu.
Press to exit to the UTILITY menu.
Press to advance to the previous/next Utility menu.
Press to switch/toggle the ON or OFF.
Press to store any changes made while in this menu.
Press to exit to the UTILITY menu.
28