Lock Programming; Basic Introduction; Factory Default; User Id - U-tec Ultraloq UL300 User Manual

3. Lock Programming

3.1 Basic Introduction

3.1.1 Factory Default

Factory setting means that any fingerprint, Code or key fob can unlock UL300.
You will hear a voice "Factory default mode, please register Admin", and the message display shows "No User".

3.1.2 User ID

User ID is used to distinguish different users. It's different from Code. UL300 provides User ID 1~200 for admin
and user. You can edit user's fingerprint, code and fob through User ID.
3.1.3 Admin and User
UL300 supports maximum 20 admins, 160 normal users and 20 temporary users.
Admin
Admin can always unlock via fingerprint, fob, code or App. Admin can add or delete other Admins and Users,
control all lock settings and view logs.
Admin is only adaptive for User ID 001~020.
Note:
Admin must be created first by Keypad before any other programming.
Normal User
Normal User can always unlock via fingerprint, code and fob or App. User ID is 021~180.
Temporary User
Temporary User has limited access within a specific time range. User ID is 181~200.
3.1.4 Code
For all codes include Admin or User code, it must be 4~8 digit.
- 20 -