GE SE 250 Mighty Small II Operating Instructions Manual page 14

2 Safety information
2.1 Safety precautions
14
WARNING
Do not operate the SE 250/260 Mighty Small II in any other way
than described in the SE 250/260 Mighty Small II Operating Instruc-
tions.
WARNING
Do not damage the power supply cord by bending, twisting, heating
or allowing them to become pinned under the equipment. Using
damaged power cords could result in fire or electric shock.
If the power supply cords are damaged, contact your local GE
representative for replacements.
WARNING
The safety lid must be in place before connecting the power leads
to a power supply.
WARNING
Any liquid on the equipment must be dried off before connecting
the power supply.
CAUTION
Circulate only water or 50/50 water/ethylene glycol through the
heat exchanger. Never use anti-freeze or any organic solvent in
the heat exchanger.
CAUTION
Never introduce anti-freeze or any organic solvent into any part
of the instrument. Organic solvents will cause irreparable damage
to the instrument.
SE 250/260 Mighty Small II Operating Instructions 29281629 AA