Amada Promecam ITS 50/12 Technical Manual page 8

PROMECAM
2.3 - RULES FOR SAFE OPERATIC)N
Use pliers or any other tooling to help bend small dimension or small width parts. Never
place your fingers near the punches.
Remove your hands form the part to be bent after the latter has been pinched between the tools.
Otherwise this might result in serious injuries.
Make sure that the operator removes the punches and the tooling in compliance with the
procedure described in this manual. Make sure that the motor is stopped at that moment.
2-2/4
INSTALLATION MANUEL-
00:03/90