Amada Promecam ITS 50/12 Technical Manual page 37

lIMADA
PROMECAM
CYCLE 3:
- Means of control two-hand control
+
pedal.
- Cycle selector (H) on position 3.
BREAKDOWN OF CYCLE
- Closure at approach speed up to mute level, by means of two-hand control panel
Mandatory stoppage at sequence level
- Release of two-hand control
- Closure at working speed above mute level, by means of pedal
- Automatic pressure holding or pressure holding by means of pedal, according to selection made
on (L)
- Automatic decompression
- Opening at high-speed up to B.D.C. as set.
RELEASE OF THE CONTROL MEANS DURING THE CLOSING PHASE CAUSES THE BEAM
TO STOP IN WHATEVER POSITION IT IS FOUND.
CYCLE 4 :
- Me"ans of control: two-hand control panel
- Cycle selector (H) on position 4.
BREAKDOWN OF CYCLE
- This cycle is exactly like cycle 2; the only difference is in the selection of the means of control.
I.T.S - LOCATION OF CONTROL DEVICES
11-3/12