Table of Contents
Advertisement
Set Up the Product
There are a number of Product parameters that are
adjusted through the setup function. To access the first
Setup menu, push .
Set the Operator Name
You can associate an operators name with electrical test
results. To set the operator name:
1.
From the Setup menu, push or until the
Operator name is highlighted.
2.
Push .
An operator list shows. The Default User name
"None" is used when an actual user name is not set.
Set the Operator Name from a List
1.
From the Operator list, push or to highlight one
of the operator names.
2.
Push .
Set a New Operator Name
1.
From the Operator list, push the New softkey.
The Product keeps a maximum of 20 operator
names. If you push the New softkey and there
are already 20 names, the Product will show an
error. You will have to delete one or more names
to add a new name.
2.
In the Keyboard screen, push , , , or to move
the highlight to a character.
3.
Push to add the highlighted character to the
name field.
You can push the F2 softkey to set the keyboard
between upper and lower case letters. Highlight
àéîöç and push to toggle between accent
characters and standard alpha-numeric letters.
4.
Do steps 2 and 3 again until the operator name is
complete.
5.
Push the Done softkey.
Push the Back softkey to delete the last
character in the name field.
Electrical Safety Analyzer
Set Up the Product
Note
Note
Note
17
Advertisement
Table of Contents
